GUI Reference
R&S
®
ZNA
599
User Manual 1178.6462.02 ─ 12
Tip:
The printer settings are not affected by a preset of the R&S
ZNA. Use the
6.15.5
Trace Data Tab
See
Chapter 6.5.10, "Trace Data Tab"
6.15.6
More Tab
The "More" buttons load simulation data or close the VNA application.
Load Simulation Data...
Imports previously stored trace data into the active diagram. The analyzer opens a dia-
log box to select the file from all trace files (
*.s?p, *.csv, *.dat
) stored on the
file system; see
on page 89. The opened trace replaces the active trace.
Exit
Persists the current state of all loaded recall sets and ends the analyzer session.
These states are automatically recalled when the analyzer application is restarted.
Tip:
This button is equivalent to the Windows
®
"Close window" command and to the
close icon in the title bar of the main firmware application window.
6.16
DUT Softtool
The "DUT" softtool comprises a single "DUT Meas" tab, which provides functions for
configuring and managing DUTs and for DUT-centric measurement setup.
DUT Softtool
