Rohde & Schwarz 1332.4500.22, Руководство пользователя

Страница: 1315 / 1476

Command Reference
R&S
®
ZNA
1315 User Manual 1178.6462.02 ─ 12
Parameters:
<Key> Number of the user key
0
–
Delete all user keys and restore the default keys ("Go to
Local", "Display Off").
1 to 8
–
User key numbers
Range: 0 to 8
*RST: 0
<Label> Label for user key no. 1 to 8 (string variable)
Example: SYST:USER:KEY 1, 'User S11'
Define a user key no. 1 labeled S11. The user key is only
labeled, no functionality is assigned.
SYST:USER:KEY? 1
Query the label. The response is
1, 'User S11'
.
SYST:USER:KEY?
Query the user action. The query returns
0,''
, indicating that
no user key has been tapped or clicked. If you tap the user soft-
key no. 1, the response is
1, 'User S11'
. Moreover, the ESR
bit no. 6 (User Request) is set.
SYST:USER:KEY 0
Delete the user key and restore the default keys.
SYSTem:VERSion?
Returns the SCPI version number to which the analyzer complies. The analyzer com-
plies to the final SCPI version 1999.0
Example: SYST:VERS?
Query the SCPI version. The response is
1999.0
.
Usage: Query only
8.3.18 TRACe Commands
The
TRACe...
commands handle active trace data and trace data stored in the ana-
lyzer's internal memory.
Trace data formats
Trace data is transferred in either ASCII or block data (REAL) format, depending on the
FORMat[:DATA]
setting. If the block data format is used, it is recommended to select
EOI as receive terminator (
SYSTem:COMMunicate:GPIB[:SELF]:RTERminator
EOI
).
The commands in the TRACe... menu use the following ZVR-compatible parameters to
specify traces:
SCPI Command Reference