Rohde & Schwarz 1141.2005.02, Быстрый старт

Страница: 54 / 144

Preparing for Use
R&S
®
SMU200A
37 Quick Start Guide 1007.9822.62 ─ 13
Assigning the IP address manually
1. Obtain the IP address and subnet mask for the R&S SMU and the IP address for the
local default gateway from your network administrator. If necessary, also obtain the
name of your DNS domain and the IP addresses of the DNS and WINS servers on
your network. If you use more than one LAN connector, you need separate address
information for each connector.
2. Press the "Windows" key to access the operating system.
3. Open the "Control Panel" by selecting "Start > Settings > Control Panel".
4. Select "Network Connections".
5. Right-click "Local Area Connection" and select "Properties" from the context-sensi-
tive menu, or
click "Local Area Connection" and then "File > Properties".
6. On the "General" tab, click "Internet Protocol (TCP/IP)" and then select "Properties".
7. Select "Use the following IP address" and enter the address information as obtained
from the network administrator.
8. If necessary, you can also select "Use the following DNS server addresses" and enter
your own DNS addresses.
For more information refer to the Windows XP Help.
2.6.3 Using computer names
Alternatively to the IP address, each PC or instrument connected in a LAN can be
accessed via an unambiguous computer name. Each instrument is delivered with an
assigned computer name, but this name can be changed.
Querying and changing a computer name
1. Press the "Windows" key to access the operating system.
2. Select "Start > My Computer > Properties > Computer Name".
The computer name is displayed under "Full Computer Name".
3. To change the computer name, select "Change", enter the new computer name and
confirm the entry.
2.6.4 Changing the Windows Firewall Settings
A firewall protects an instrument by preventing unauthorized users from gaining access
to it through a network. Rohde & Schwarz highly recommends the use of the firewall on
your instrument. R&S instruments are shipped with the Windows firewall enabled and
preconfigured in such a way that all ports and connections for remote control are enabled.
For more details on firewall configuration see the R&S White Paper "Malware Protection"
Setting Up a Network (LAN) Connection