Rohde & Schwarz 1141.2005.02, Быстрый старт

Страница: 123 / 144

Manual Operation
R&S
®
SMU200A
106 Quick Start Guide 1007.9822.62 ─ 13
Select the "Edit Table..." button and define the positions and states of the ramps for
the selected marker.
Confirm the entries with "Accept".
5. Preset a marker signal
Select the "Preset" button to preset the marker signal.
The ramps of the selected marker are adjusted according to the selected "Preset
Type".
Creating a new control list
A new control list can be created under a new name either by generating a blank file or
by changing an existing list which will then be saved under a new name.
1. To create an empty control list, select "BB > Cust Dig Mod > List Management... >
Select Control List to Edit > Create Control List" and enter the file name of the new
control list.
2. To open the control list for editing, select the associated button "BB > Cust Dig Mod
> List Management... > Select Control List to Edit > Edit Control List..." and select an
existing control list.
4.6 How to Use the Help System
The R&S SMU is equipped with a context-sensitive help function. A help page is available
for each parameter and can be called any time during instrument operation.
Compiled online help systems are also available for all functions of the R&S SMU on the
CD-ROM supplied with the instrument. This help program can be called on any controller
with Internet Explorer version V4.0 and higher.
Calling context-sensitive and general help
► To display the general help dialog box, press the HELP (F1) key.
The help dialog is displayed. A topic containing information about the current menu
or the currently opened dialog box and its function is displayed.
How to Use the Help System