Safety Information
Impact Wrench
6
© Rodcraft - 8956002216
Technical Data
Technical Data
RC2266
Free speed (rpm)
9000
Max. torque (reverse) (Nm)
1000
Max. working torque (Nm)
750
Weight (kg)
2.18
Declarations
EU Declaration of Conformity
We,
Desoutter GmbH
, Edmund-Seng-Str. 3-5,
63477 Maintal, Germany, declare under our sole
responsibility that the product (With name, type,
and serial number, see the front page) is in con-
formity with the following Directive (s):
2006/42/EC
Harmonized standards applied:
EN ISO 11148-6:2013
Authorities can request relevant technical infor-
mation from:
Pascal Roussy, R&D Manager, Ets Georges Re-
nault, 38 rue Bobby Sands, BP10273 44818
Saint Herblain, France
Saint-Herblain, 2022/08/31
Pascal ROUSSY
UK Declaration of Conformity
We,
Desoutter GmbH
, Edmund-Seng-Str. 3-5,
63477 Maintal, Germany, declare under our sole
responsibility that the product (with name, type
and serial number, see front page) is in con-
formity with the following UK Regulation(s):
Supply of Machinery (Safety) Regulations 2008
Designated Standards applied:
EN ISO 11148-6:2013
Saint-Herblain, 2022/09/20
Signature
Pascal ROUSSY
Authorities can request relevant technical information from:
UK Authorized Representative:
Air Compressors & Tools Ltd
Unit 5 Westway 21
Chesford Grange, Woolston,
Warrington, WA1 4SZ
UK
Contact:
M.Taylor
Noise and Vibration Declaration Statement
• Sound pressure level 96.4 dB(A) , uncertainty 3 dB(A),
in accordance with ISO 15744.
• Sound power level 107.7 dB(A) , uncertainty 3 dB(A), in
accordance with ISO 15744.
• Vibration total value 13.6 m/s
2
, uncertainty 5.9 m/s
2
, in
accordance with ISO-28927-2.
These declared values were obtained by laboratory-type test-
ing in accordance with the stated standards and are suitable
for comparison with the declared values of other tools tested
in accordance with the same standards. The vibration emis-
sion level may be used for a preliminary assessment of expo-
sure. These declared values are not adequate for use in risk
assessments and values measured in individual workplaces
maybe higher. The actual exposure values and risk of harm
experienced by an individual user are unique and depend
upon the way the user works, the workpiece, and the work-
station design, as well upon the exposure time and the physi-
cal condition of the user.
We,
Desoutter GmbH
, cannot be held liable for the conse-
quences of using the declared values, instead of values re-
flecting the actual exposure, in an individual risk assessment
in a workplace situation over which we have no control.
This tool may cause hand-arm vibration syndrome if its use
is not adequately managed. An EU guide to managing hand-
arm vibration can be found by accessing
and selecting 'Tools' then 'Legis-
lation'.
We recommend a programme of health surveillance to detect
early symptoms which may relate to noise or vibration expo-
sure, so that management procedures can be modified to help
prevent future impairment.
If this equipment is intended for fixtured applications:
The noise emission is given as a guide to the machine-
builder. Noise and vibration emission data for the com-
plete machine should be given in the instruction manual
for the machine.
Information regarding Article 33 in REACH
The European Regulation (EU) No. 1907/2006 on Registra-
tion, Evaluation, Authorization, and restriction of Chemicals
(REACH) defines among other things requirements related to
communication in the supply chain. The information require-
ment applies also to products containing so-called Sub-
stances of Very High Concern (the “Candidate List”). On 27
June 2018 lead metal (CAS nr 7439-92-1) was added to the
Candidate List.
In accordance with the above, this is to inform you that cer-
tain mechanical components in the product may contain lead
metal. This is in compliance with current substance restric-
tion legislation and based on legit exemptions in the RoHS
Directive (2011/65/EU). Lead metal will not leak or mutate
from the product during normal use and the concentration of
lead metal in the complete product is well below the applica-
ble threshold limit. Please consider local requirements on the
disposal of lead at product end of life.
