Roda RD15 B, Руководство пользователя

Страница: 24 / 51

Components and Operations RD15 B Manual
Page 24
Use the brightness up/down buttons to set the display brightness in NVIS mode.
Push MODE/SET button 1x
2. NVIS keyboard brightness (LED flashes green)
Use the brightness up/down buttons to set keyboard brightness in NVIS mode.
Push MODE/SET button 1x
3. Invisible Mode display brightness (LED flashes red)
Use the brightness up/down buttons to set the display brightness in Invisible Mode.
Push MODE/SET button 1x
4. Invisible Mode keyboard brightness (LED flashes red and green)
Use the brightness up/down buttons to set keyboard brightness in Invisible Mode.
2.16.1 Additional controls
• Push MODE/SET 2x

Skip parameter and select next parameter
• Push MODE/SET 5 seconds

End programming mode
Please note
: To reset the display to factory settings and to reverse all NVIS and Invisible Mode set-
tings, push the MODE/SET button and switch the display one. Keep the MODE/SET button for 2 more
seconds and then release it.
2.17 Remote ON/OFF
RD-DVI compatible devices (e.g. Rocky RFx/RKx), which are connected to the RD15 B via dual link DVI ca-
ble can be shut ON/OFF remotely with the RD15 B ON/OFF button. Please note: in this case the power ON/
OFF delay of the RD15 B is still in place. To shut ON/OFF the notebook the RD15 B’s ON/OFF button must be
pressed for approx. 5 seconds without interruption. Also the display itself can be shut ON/OFF with the ON/
OFF button of the notebook (no delay circuit).
2.18 Power supply
The display can be powered via AC/DC or DC/DC adapter.
2.18.1 MIL AC/DC adapter
The AC/DC adapter automatically detects the AC line voltage and adjust accordingly (within its specifica-
tions see chapter „3.2 AC/DC adapter“).