roco Z21 WLANmaus, Руководство пользователя

Страница: 38 / 104

Model Railway Control Unit
38
zLink
Interface for configuration and
firmware update
Programming button in normal mode:
•
hold down until “Program” flashes (for at least 3 s):
Configuration mode
•
hold down until all LEDs are shining (for at least 8 s):
Reset to factory settings
Programming button in configuration mode:
•
press briefly:
Change setting (for options 2 and 3)
•
hold down until “Status” flashes blue (for at least 3 s):
next option
Signal outputs A 1 – 8
Signal outputs B 1 – 8
Configurable per signal
Track signal
DCC signal input from the control centre or booster
Supply
from track or power unit
12 – 20 V DC or DCC rail voltage
min. 2 A e.g.: ROCO 10850
Option 1:
• Switch the magnet accessory (e.g. turnout command) with the
desired address
• Address is adopted from the Z21 signal DECODER
Option 2:
The number of signals can be changed by briefly pressing the pro -
gramming button.
Option 3:
The addressing mode can be changed by briefly pressing the pro -
gramming button.
1. Quick guide
LED status normal mode
shines blue
flashes blue
flashes red
flashes green
shines green
Track signal pending
No 3 track signal
Short circuit
Data received
Addressing in conform-
ity with RCN-213
LEDs in configuration mode
flashes white once
shines green
Option 1: Set address
flashes white twice
shines green
Option 2: Number of
signals=2
flashes white twice
shines green
and red
Option 2: Number of
signals=3
flashes white twice
shines green
and red
and blue
Option 2:
Number of
signals=4
flashes white 3 times
shines red Option 3: Addressing
compatible with ROCO
or
flashes white 3 times
shines green
Option 3: Addressing
in conformity with
RCN-213