1
Toll free 800-669-6588
P.O. Box 6936 Harlowton, MT 59036
www.rockymountaincookware .com
Setup instructions for Bear Tooth Grill.
3 and 5-foot Modes, Wind Guards Plus Helpful Hints.
Thank you for choosing the Bear Tooth Grill. The most portable on the Market. If you cannot find the answer to your
question in these set up instructions, please call or email and we will make every attempt to help. Your grill is assembled
except for attaching wheel assembly.
It is easiest to cut the box down the corners to remove.
5 Ft. Mode w/ Wind guard
3 Ft. Mode w/Wind guard
Transport Mode w/Wind guard
#1 Transport Mode. #2 Stand grill on end and remove pins both sides from the legs with wheels. #3 While stabilizing
grill raise the wheeled legs up and pin at a right angle to grill. Pin both sides. #4 While stabilizing grill shorten wheeled
legs by unpinning, sliding in and repining. Lower the grill down on its wheels. For first time setup the wheel section of
the legs will need to be inserted into main legs at this time.
#1
#2
#3
#4
#5, 6 & 7
Caution: requires vertical lift of 50 Lbs.
To reduce weight, remove contents first. Unpin legs on the non-
wheeled end, swing legs clear around to right angle of grill while raising lowered end up. Pin into place. Remove the
contents of the unit and set aside. Determine size of cooking Mode you will be using. 3-foot or 5-foot. Transport mode
is the same as 3-foot. If 5-foot remove long pins (#7) and expand body to next set of holes. Insert pin.
Never cook
without main body pins in place.
