Rockwell ShopSeries RS8151, Инструкция по эксплуатации

Страница: 11 / 16

11
belt&disc sander en
23. Never perform layout, assembly or set-up work on
the table while the sander is operating.
24. Never leave the machine work area when the power
is “ON” or before the machine has come to a
complete stop.
25. Never use solvents to clean plastic parts. Solvents
could possibly dissolve or otherwise damage the
material. Only a soft damp cloth should be used to
clean plastic parts.
26. Should any part of your sander be missing,
damaged, or fail in any way, or any electrical
components fail to perform properly, shut off switch
and remove plug from power supply outlet. Replace
missing, damaged or failed parts before resuming
operation.
27. The use of attachments and accessories not
recommended by manufacture may result in the risk
of injuries.
28. warning: Some dust particles created by
power sanding, sawing, grinding, drill and other
construction jobs contain chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
•
Lead from lead-based paints.
• Crystalline silica from bricks and cement and other
masonry products.
•
Arsenic and chromium from chemically treated
lumber.
Your risk from these exposures varies, depending upon
how often you do this type of work. To reduce your
exposure to these chemicals:
• Work in a well-ventilated area.
• Work with approved safety equipment, such as
those dust masks that are specially designed to
filter microscopic particles.
syMbOls
To reduce the risk of injury, user must read
instruction manual.
Warning
Wear dust mask
Wear eye protection
Wear ear protection
RCM approval mark