Rockwell Automation Trusted TMR 24V DC страница 29 Скачать руководство пользователя | Manualshive

Страница: 29 / 43

background image

Chapter 4

Application

Rockwell Automation Publication ICSTT-RM451D-EN-P - March 2021

29

Table 14 Rack 8: INFO bit Descriptions

Channel

Description

5

Shutdown

4

Maintain

3

Active

2

Standby

1

Configuration

0

Unknown, no Module present

The FCR Status channel reports the fault status of the Active and Standby
Modules. The value is bit-packed as shown below, the least significant byte is
used with the most significant 8-bits set to zero:

Table 15 Rack 8: FCR bit Descriptions

Bit

7

6

5

4

3

2

1

0

Standby Module

Active Module

Ejectors open FCR C Healthy FCR B Healthy FCR A Healthy Ejectors open FCR C Healthy FCR B Healthy FCR A Healthy

The ‘Primary Module is active’ channel is set to nonzero if the primary Module
is the current Active Module, that is, the Active Module is in the chassis and
slot numbers defined within the OEM parameters.

The ‘Active Module is simulated’ channel is set to nonzero if the Active Module
is being simulated, this is only set if the Module is not present or the
simulation enable has been set within the Module’s configuration in the
System.INI file.

Each Boolean Output Variable can be configured for automatic Sequence of
Events (SOE) logging. This applies to the Output Status and Line Fault Status
variables. A Boolean variable is configured for SOE during the variable

definition in the Data Dictionary Editor. To select SOE, press the Extended
Button in the Boolean Variable Definition Dialog Box to open the Extended
Definition Dialog. Then check the box for Sequence of Events to enable the
variable for automatic SOE logging.

During operation, the Output Module automatically reports time-stamped
change of state information for the output data. The TMR Processor
automatically logs change of state for configured SOE variables into the
system SOE Log. The SOE Log can be monitored and retrieved using the SOE
and Process Historian Package running on the EWS. This software package is
described in Trusted Sequence of Events and Process Historian Package
Product Description, publication

(PD-T8013).

Sequence of Events

Configuration

«
...
27
28
29
30
31
...
»

Содержание Trusted TMR 24V DC












































Отзывы:

Нет отзывов

Похожие инструкции для Trusted TMR 24V DC

EtherCAT CoolDrive RC Series

Бренд: Tsino Dynatron Страницы: 278

Бренд: Parker Страницы: 154

ECI-42 K1 Series

Бренд: ebm-papst Страницы: 28

Бренд: Wittenstein Alpha Страницы: 23

Бренд: Wittenstein Страницы: 35

GREENSMASTER 3100

Бренд: Toro Страницы: 48

Greensmaster 3150

Бренд: Toro Страницы: 48

Бренд: RIB Страницы: 44

Бренд: Romac Industries Inc. Страницы: 4

Бренд: ST Страницы: 14

Бренд: Japa Страницы: 48

Бренд: LinMot Страницы: 32

Бренд: Simu Страницы: 5

Бренд: Grundfos Страницы: 24

XtraDrive XD Series

Бренд: YET Страницы: 43

Бренд: YASKAWA Страницы: 287

Бренд: YASKAWA Страницы: 46

Бренд: ZF-DUOPLAN Страницы: 31

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды