Rockwell Automation iTRAK, Руководство пользователя

Страница: 34 / 124

34 Rockwell Automation Publication 2198T-UM002C-EN-P - March 2019
Chapter 1 Start
Safe Magnet Handling
• The track creates strong magnetic fields while energized during
operation.
• Persons with heart pacemakers, metal implants, or hearing aids must not
enter the following areas.
– Where components of the drive and control systems are mounted,
commissioned, and operated.
– Where parts of motors with permanent magnets are stored, repaired,
or mounted.
Magnet Plate Keeper
Exposed or uninstalled magnet plates, whether they are mounted to a mover or
free-standing, must have a keeper that covers the entire magnet face. The
keeper must consist of 5…10 mm (0.2…0.4 in.) wood or cardboard over the
magnets and a 0.5…1.5 mm (0.02…0.06 in.) thick ferrous sheet metal over the
wood or cardboard.
Figure 16 - Magnet Plate Keeper
Magnet plates that are covered with a keeper are fairly safe to handle. They
must be kept at least 305 mm (12 in.) away from other magnet plates and other
ferrous metal parts such as hardware and tools.
Magnet plates without keepers must be kept a minimum of 1 m (3.3 ft) away
from other magnet plates and ferrous metal parts.
ATTENTION: The strong magnets of the mover can attract metal objects that
are in its proximity. When you handle and install, maintain distance between
the mover and ferrous metal mounting surfaces or structures.
Maintenance personnel must avoid the use of metallic tools and secure items
such as badge clips and other personnel effect that could be attracted to the
strong magnetic field.
Strong magnets can erase magnetic media. Never let credit cards or electronic
media contact or come near the mover or iTRAK system.
Ferrous Sheet Metal
Wood or Cardboard
Magnet Plate