Rockwell Automation Allen-Bradley PanelView 5510 Series, Руководство пользователя

Страница: 84 / 112

84 Rockwell Automation Publication 2715P-UM001C-EN-P - March 2019
Chapter 5 Install and Replace Components
7. Reattach the logic module by aligning the connector on the bottom of the
logic module with the connector on the back of the display module.
8. Push down on the logic module and make sure that it is fully seated.
9. Tighten the screws to a torque of 0.68…0.90 N•m (6…8 lb•in).
Install a Protective Overlay The overlay protects the touch screen and
keys from scratches, dust, fingerprints, and
external damage from chemicals or abrasive
materials. See
Table 4 on page 17 for a list of
available overlays.
The protective overlay covers the entire
surface of the terminal bezel inside the
aluminum perimeter. The overlay has a
protective liner that is removed by pulling
back on a tab. Do not remove the liner until
you are ready to install the overlay.
Before installing the overlay, clean the touch screen and keys, if present, by using a
lint-free cloth and a mild glass cleaner. Remove all fingerprints, grease, or dust.
Marks that are not removed get trapped underneath the overlay. Grease also
affects the adhesion of the overlay.
Module
Connectors
Logic Module
Display Module
IMPORTANT Follow these guidelines when installing the overlay:
• Make sure that your hands are clean and dry.
• Handle the overlay by its edges to prevents fingerprints or lint. If you do get
marks or lint on the overlay, remove them before proceeding.
• Do not touch the adhesive ring.