Rockwell Automation Allen-Bradley MobileView 2711T-B10I1N1 Скачать руководство пользователя страница 48 | Manualshive

Страница: 48 / 48

Rockwell Automation Allen-Bradley MobileView 2711T-B10I1N1 Скачать руководство пользователя страница 48

Rockwell Otomasyon Ticaret A.Ş., Kar Plaza İş Merkezi E Blok Kat:6 34752 İçerenköy, İstanbul, Tel: +90 (216) 5698400

Rockwell Automation maintains current product environmental information on its website at

http://www.rockwellautomation.com/rockwellautomation/about-us/sustainability-ethics/product-environmental-compliance.page

.

Publication 2711T-QS002C-EN-P - March 2019

DIR 10003032828 _01

Supersedes Publication 2711T-QS002B-EN-P - December 2017

Copyright © 2019 Rockwell Automation, Inc. All rights reserved. Printed in Austria.

Allen-Bradley, FactoryTalk, Guardmaster, MobileView, On-Machine, Rockwell Automation, Rockwell Software, and ThinManager are trademarks of
Rockwell Automation, Inc.
Intel Atom is a trademark of Intel Corporation.
Microsoft and Windows are trademarks of Microsoft Corporation.
SD is a trademark of SD-3C LLC.
VESA is a trademark of the Video Electronics Standards Association.

At the end of its life, this equipment should be collected separately from any unsorted municipal
waste.

*PN-428428*

PN-428428

Additional Resources

These documents contain more information about related products from Rockwell Automation.

You can view or download publications at

https://www.rockwellautomation.com/global/

literature-library/overview.page

Resource

Description

MobileView Tethered Operator Terminal User Manual,
publication

Provides information to install, operate, and troubleshoot MobileView
2711T terminals and junction boxes.

FactoryTalk View Machine Edition User’s Guide,
publication

Provides comprehensive information about FactoryTalk View Machine
Edition, procedures to create and run an automation application, and
reference information.

Industrial Automation Wiring and Grounding
Guidelines, publication

Provides general guidelines to install a Rockwell Automation industrial
system.

Product Certifications website,

rok.auto/certifications

Provides declarations of conformity, certificates, and other certification
details.

«
...
46
47
48

Содержание Allen-Bradley MobileView 2711T-B10I1N1

















































Отзывы:

Нет отзывов