72
Rockwell Automation Publication LDAT-UM001A-EN-P - April 2016
Appendix A
Interconnect Diagrams
Figure 16 - Grounding Techniques for Feedback Cable Shield
14
11
10
7
6
5
4
3
2
1
Clamp
Expose shield that is secured under clamp.
Clamp Screw (2)
Turn clamp over to hold
small cable secure.
Cable Tie
Exposed shield that is
secured under clamp.
2090-UXBB-DM15 Connector Kit
2090-KxCK-D15M and
LDAT-CONNKIT-ABS
Connector Kits
Exposed Shield
Aligned
in the Cable Channel
Service Loops
Tie Wrap for Stress Relief
and Wire Management
Clamp Screws (2)
1. Place exposed cable shield
in the channel.
2. Place the shield clamp over
the exposed shield.
3. Tighten screws, torque
0.3 N•m (2.6 lb•in).
Shield Clamp
10-pin
Connector
2198-H2DCK Converter Kit, Series B
Содержание Allen-Bradley LDAT-S03 Series
Страница 6: ...6 Rockwell Automation Publication LDAT UM001A EN P April 2016 Table of Contents Notes...
Страница 50: ...50 Rockwell Automation Publication LDAT UM001A EN P April 2016 Chapter 4 Commission Notes...
Страница 75: ...Rockwell Automation Publication LDAT UM001A EN P April 2016 75 Index Notes...