Rockwell Automation Allen-Bradley ClearMultiprint 1492-PRINTCMP, Быстрый старт

Страница: 28 / 31

28 Rockwell Automation Publication 1492-QS003B-EN-P - October 2019
Chapter 7 Maintenance
Clean , Change , or Replace the Print Roller
Accumulations of dirt on the print roller can impair
the media transport and the print quality.
Figure 2 - Clean, Change, or Replace the Print Roller
1. Turn the lever (2) counterclockwise to open the
print head.
2. Remove the material and transfer ribbon from the
printer.
3. Fold down the cover with the tear-off plate.
4. Lift the print roller (4) from its retainers(3).
5. Remove the deposits with the roller and clean with a
soft cloth. Replace the roller if it appears damaged.
6. Push the roller with bearings (1) into the retainer (3)
until they click into place.
7. Fold up the cover with the tear-off plate.
EEE Yönetmeliðine Uygundur. (In Conformity with the EEE Regulation)
Battery Notice:
This product contains Perchlorate material. Special handling may apply. For more information, go to
http://www.dtsc.ca.gov/hazardouswaste/perchlorate/
.
Item Description
1 Roller with bearing
2 Print head lock lever
3 Retainers
4 Print roller
5 Cover
• At the end of its life, this equipment should be collected separately from any unsorted municipal waste.
• This product contains a sealed lithium battery which is permanently connected and should only be removed or replaced by
trained professionals.
• At the end of its life, the battery contained in this product should be collected separately from any unsorted municipal waste.
The collection and recycling of batteries helps protect the environment and contributes to the conservation of natural resources
as valuable materials are recovered.
1
2
4 3 3 5
Roller for Terminal Block Tags (catalog number 1492-PROLLTB)
Roller for Label Printing (catalog number 1492-PROLLLAB)