Rockwell Automation Allen-Bradley ClearMultiprint 1492-PRINTCMP, Быстрый старт

Страница: 27 / 31

Rockwell Automation Publication 1492-QS003B-EN-P - October 2019 27
Chapter
7
Maintenance
Proper maintenance and regular print head cleaning are required to provide a consistently good printed image and to
reduces print head wear.
Clean the Print Head
Clean the print head for every ribbon roll change. Substances can accumulate on the print head during printing and
adversely affect printing.
1. Lift the print head.
2. Remove the labels and transfer ribbon from the printer.
3. Clean the print head line with rubbing alcohol and soft cloth.
4. Allow the print head to dry for two to three minutes before
commissioning the printer.
ATTENTION: Improper handling can cause print head damage. Do not touch the underside of the print head with the fingers or
sharp objects. Confirm that the labels are clean.
SHOCK HAZARD: Disconnect the printer from the power supply before performing any maintenance.
IMPORTANT • Abrasive cleansers can damage the print head. Do not use abrasive cleaners or solvents for cleaning the external surfaces or
modules.
• Remove dust and paper fluff from the print area with a soft brush or vacuum cleaner.
• The cover of the printer can be cleaned with a standard cleanser.
IMPORTANT Damage to the print head can result from contact with the protective glass layer or the use of sharp or hard objects to clean the
print head
ATTENTION: There is a risk of injury from the hot print head line. Check that the print head has cooled down before starting to
clean it.
Print head line