Rockwell Automation Allen-Bradley 6181X-12A2SW71DC, Allen-Bradley 6181X-00N2SW71DC, Allen-Bradley 6181X-12A2SWX1DC, Allen-Bradley 6181X-00N2SWX1DC, Скачать руководство пользователя страница 54

Страница: 54 / 78

Rockwell Automation Publication 6181X-UM002A-EN-P - October 2017

Chapter 5

Set Up the UEFI Utility

Diagnostics

The Diagnostics menu lets you run the diagnostics utility to determine the cause
of the system malfunction by testing computer components, such as the
processor, memory, drives, video, and other hardware.

Select a menu option by pressing the up



or down



arrow keys and pressing

Enter when a menu is highlighted. Press the left



or right



arrow keys to

toggle between the five Diagnostics menu selections.

The following table lists the shortcut options in the Diagnostics menu.

Button

Description

Esc

Stops a test in progress or exits Diagnostics from any of the six menu options.

Enter

Runs the highlighted test or option.

Displays the Help screens.

Edits batch parameters.

Loads batch parameters.

Saves batch parameters.

Selects or deselects the current test.

Selects or deselects all tests in menu.

Selects or deselects all tests.

Selects or deselects all quick tests.

Displays a list of the Diagnostic function keys.

F10

Runs the selected test or tests.

Содержание Allen-Bradley 6181X-12A2SW71DC, Allen-Bradley 6181X-00N2SW71DC, Allen-Bradley 6181X-12A2SWX1DC, Allen-Bradley 6181X-00N2SWX1DC,















































































Результаты поиска

Содержание Allen-Bradley 6181X-12A2SW71DC, Allen-Bradley 6181X-00N2SW71DC, Allen-Bradley 6181X-12A2SWX1DC, Allen-Bradley 6181X-00N2SWX1DC,

Отзывы:

Похожие инструкции для Allen-Bradley 6181X-12A2SW71DC, Allen-Bradley 6181X-00N2SW71DC, Allen-Bradley 6181X-12A2SWX1DC, Allen-Bradley 6181X-00N2SWX1DC,

Бренды по названию

Популярные бренды

Rockwell Automation Allen-Bradley 6181X-12A2SW71DC, Allen-Bradley 6181X-00N2SW71DC, Allen-Bradley 6181X-12A2SWX1DC, Allen-Bradley 6181X-00N2SWX1DC,, Руководство пользователя

Результаты поиска

Содержание Allen-Bradley 6181X-12A2SW71DC, Allen-Bradley 6181X-00N2SW71DC, Allen-Bradley 6181X-12A2SWX1DC, Allen-Bradley 6181X-00N2SWX1DC,

Отзывы:

Похожие инструкции для Allen-Bradley 6181X-12A2SW71DC, Allen-Bradley 6181X-00N2SW71DC, Allen-Bradley 6181X-12A2SWX1DC, Allen-Bradley 6181X-00N2SWX1DC,

Бренды по названию

Популярные бренды