Rockwell Automation Allen-Bradley 6181X-12A2SW71DC, Allen-Bradley 6181X-00N2SW71DC, Allen-Bradley 6181X-12A2SWX1DC, Allen-Bradley 6181X-00N2SWX1DC,, Руководство пользователя, Страница: 33 / 78

Rockwell Automation Publication 6181X-UM002A-EN-P - October 2017 33
Replace Components Chapter 4
Post-configuration Follow these steps after you install or remove a hardware component.
1. Make sure that all components are installed according to instructions.
2. Make sure that no tools or loose parts are left inside the computer.
3. Reinstall any expansion boards, peripherals, and system cables that were
previously removed.
4. Reinstall the cover according to the instructions on page 34 .
5. Reconnect all external cables and power to the computer.
6. Press the power switch to start the computer.
Tools for Component
Replacement The following tools are required for component replacement:
• #2 cross-head screwdriver
• Anti-static wriststrap
Remove the Cover To install, replace, or upgrade internal computer components, you must first
remove the cover.
Follow these steps to remove the rear cover (the display computer is shown).
1. Follow the steps for Pre-configuration on page 32 .
2. Loosen the three screws that secure the rear cover (A).
3. Open the cover (B) and detach it from the chassis (C).
4. After you have installed, replaced, or upgraded internal computer
components, reinstall the cover as detailed in Reinstall the Cover on
page 34 .
A
B
A
A
C
C