Rockwell Automation Allen-Bradley 2094-BC01-M01-S Скачать руководство пользователя страница 141

Страница: 141 / 280

Rockwell Automation Publication 2094-UM001D-EN-P - May 2010

141

Configure and Start Up the Kinetix 6000 Drive System

Chapter

Configure the Motion Group

Follow these steps to configure the motion group.

Right-click Motion Groups in the Controller Organizer and choose New
Motion Group.

The New Tag dialog box opens.

Type the new motion group Name.

Click OK.

The new motion group appears under the Motion Groups folder.

Right-click the new motion group and choose Properties.

The Motion Group Properties dialog box opens.

Click the Axis Assignment tab and move your axes (created earlier) from
Unassigned to Assigned.

Click the Attribute tab and edit the default values as appropriate for your
application.

Click OK.

Содержание Allen-Bradley 2094-BC01-M01-S

























































































































































































































































































Результаты поиска

Содержание Allen-Bradley 2094-BC01-M01-S

Отзывы:

Rockwell Automation Allen-Bradley 2094-BC01-M01-S, Руководство пользователя, Страница: 141 / 280

Результаты поиска

Содержание Allen-Bradley 2094-BC01-M01-S

Отзывы: