Rockwell Automation Allen-Bradley 2094-AC-M-S Series, Справочник по безопасности

Страница: 45 / 52

Rockwell Automation Publication GMC-RM002F-EN-P - June 2013 45
EC Certifications Appendix C
EC Declaration of Conformity For complete declarations of conformity (DoC) currently available from
Rockwell Automation, go to
http://www.rockwellautomation.com/products/certification .
Figure 32 - Kinetix 6000 Servo Drives EC DoC
Document Control Number: IMC-0011-X-EN 1 / 9
EC Declaration of Conformity
The undersigned, representing the manufacturer and the authorized representative established within the
Community
Rockwell Automation, Inc.
6400 W. Enterprise Drive
Mequon, WI 53092
U.S.A. Rockwell Automation B.V.
Rivium Promenade 160
2909 LM Capelle aan den IJssel
The Netherlands
herewith declare that the Products
Digital Servo Drives and Accessories Kinetix
6000/6200/6500/6000M
Product identification (brand and
catalogue number/part number):
Allen-Bradley Bulletin 2094
(reference the attached list of catalogue numbers)
Product Safety Function: Safe Standstill (Kinetix6000-S products)
Safe Torque-Off (Kinetix6200/6500-S0, Kinetix6000M-S products)
Safe Speed Monitor Option (Kinetix6200/6500-S1 products)
are in conformity with the essential requirements of the following EC Directive(s) when installed in accordance with
the installation instructions contained in the product documentation:
2006/95/EC Low Voltage Directive
2004/108/EC EMC Directive
2006/42/EC Machinery Directive
and that the standards and/or technical specifications referenced below have been applied:
EN 50178:1997 Electronic equipment for use in power installations
EN 61800-5-1:2007 Adjustable speed electrical power drive system – Part 5-1: Safety requirements
– Electrical, thermal and energy.
EN 61800-5-2:2007 Adjustable speed electrical power drive systems – Part 5-2: Safety
requirements – Functional
EN 61800-3:2004 Adjustable speed electrical power drive systems – Part 3: EMC requirements
and specific test methods
EN 60204-1:2006/A1:2009 Safety of machinery – Electrical equipment of machines – Part 1: General
requirements
EN 60034-1:2004 Rotating electrical machines – Part 1: Rating and performance (TL, MPF,
MPG, MPL, MPM,MPS, MPAS and RD only)
EN 61508: Part 1-7:2000
11
Functional safety of electrical/electronic/programmable electronic safety-
related systems
EN ISO 13849-1:2008
11
Safety of machinery – Safety-related parts of control systems – Part 1: General
principles for design
Year of CE Marking: 2002
Manufacturer: Authorized Representative in the Community:
Signature Signature
Name: Thomas Van Groll Name: Viktor Schiffer
Position: Director Engineering Position: Engineering Manager
Date: 14-May-2012 Date: 15-May-2012