Rockwell Automation Allen-Bradley 1769-ASCII, Руководство пользователя

Страница: 24 / 118

24 Rockwell Automation Publication 1769-UM012B-EN-P - January 2014
Chapter 2 Configure the 1769-ASCII Module
Module Definition Dialog Box
The Module Definition dialog box contains a set of configuration parameters
that affects data transmission between the controller and the I/O module.
The Change button on the Module Properties General tab provides access where
the listed parameters can be changed.
This is where you specify the Series, Revision, and Electronic Keying. You can do
the following:
•
Choose connection type
•
Select alternating or simultaneous mode
•
Assign the data format type
TIP
Online edits are not possible when the controller is in RUN mode. Online edits
must be made only when the controller is in Remote Run or Program modes.
Table 1 - Module Definition Parameters Descriptions
Parameter Description
Series Module’s hardware series.
Revision Major and minor firmware revision levels used on the module.
Electronic Keying When you configure a module, you specify the slot number for the module. However, it is
possible to purposely or accidentally place a different module in that slot. Electronic keying lets
you protect your system against the accidental placement of the wrong module in a slot. The
chosen keying option determines how closely any module in a slot must match the
configuration for that slot before the controller opens a connection to the module. There are
different keying options depending on your application needs. See
Using Electronic Keying on
page 105 for detailed information.
Connection The connection type between the controller writing the configuration and the I/O module is
Output.
Data Format Integer data transferred between the controller and I/O module and what tags are generated
when the configuration is complete.