Rockwell Automation Publication 1606-RM100A-EN-P - July 2020
15
Power Supply - 24V, 5 A, 120 W, Single-phase Input Reference Manual
EMC
The electromagnetic capability (EMC) behavior of the device is designed for
applications in the industrial environment and residential, commercial, and
light industry environments.The device is investigated according to EN 61000-
6-1, EN 61000-6-2, EN 61000-6-3, and EN 61000-6-4.
EMC Immunity
Electrostatic discharge
EN 61000-4-2
Contact discharge
8 kV
Criterion A
(1)
(1)
A: The device shows normal operation behavior within the defined limits.
C: Temporary loss of function is possible. The device can shut down and restarts by itself. No damage or hazards for the
device will occur.
Air discharge
15 kV
Criterion A
Electromagnetic RF field EN 61000-4-3
80 MHz…2.7 GHz
20V/m
Criterion A
Fast transients (Burst)
EN 61000-4-4
Input lines Output lines
4 kV
Criterion A
Output lines
2 kV
Criterion A
DC OK signal (coupling
clamp)
2 kV
Criterion A
Surge voltage on input
EN 61000-4-5
L to N,
2 kV
Criterion A
L to PE, N to PE
4 kV
Criterion A
Surge voltage on output EN 61000-4-5
+ to -
1 kV
Criterion A
+/- to PE
2 kV
Criterion A
Surge voltage on DC OK
EN 61000-4-5
DC Okay Signal to PE
1 kV
Criterion A
Conducted disturbance
EN 61000-4-6
0.15…80 MHz
20V
Criterion A
0% of 100V AC
0V AC, 20 ms
Criterion A
40% of 100V AC
40V AC, 200 ms
Criterion C
70% of 100V AC
70V AC, 500 ms
Criterion A
0% of 100V AC
0V AC, 20 ms
Criterion A
40% of 100V AC
80V AC, 200 ms, < 4 A Criterion A
40% of 100V AC
80V AC,500 ms, > 4 A
Criterion C
70% of 100V AC
140V AC, 20 ms
Criterion A
Voltage interruptions
EN 61000-4-11
0% of 200V AC (=0V)
5000 ms
Criterion C
Powerful transients
VDE 0160
Over entire load range
750V, 0.3 ms
Criterion A
EMC Emission
Conducted emission input lines
EN 55011, EN 55022, FCC Part 15, CISPR 11, CISPR 22
Class B
Conducted emission output lines
IEC/CISPR 16-1-2, IEC/CISPR 16-2-1
Limits for local DC power networks fulfilled
Radiated emission
EN 55011, EN 55022
Class B
Harmonic input current (PFC)
EN 61000-3-2
Fulfilled for Class A equipment
Voltage fluctuations, flicker
EN 61000-3-3
Fulfilled, tested with constant current loads, non-
pulsing
This device complies with FCC Part 15 rules. Operation is subjected to following two conditions: (1) this device cannot cause harmful interference, and (2) this device must
accept any interference received, including interference that can cause undesired operation.
Switching Frequency
PFC converter
110 kHz
Fixed frequency
Main converter
84 kHz …140 kHz
Output load dependent
Auxiliary converter
60 kHz
Fixed frequency
