Rockwell Automation Allen-Bradley 1606-XLDF240F, Справочное руководство

Страница: 13 / 26

Rockwell Automation Publication 1606-RM124A-EN-P - September 2021 13
DC/DC Converter - 48V/48V, 5 A, 240 W Reference Manual
Electromagnetic
Compatibility
The electromagnetic compatibility (EMC) behavior of the device is designed
for applications in industrial, residential, commercial, and light industrial
environments.
The device is investigated according to EN 61000-6-1, EN 61000-6-2,
EN 61000-6-3, and EN 61000-6-4.
EMC immunity information is provided in the following table.
EMC emission information is provided in the following table.
Switching frequency information is provided in the following table.
Attributes Standards Values
Criteria
(1)
(1) Criterion A: The device shows normal operation behavior within the defined limits.
Criterion C: Temporary loss of function is possible. The device can shut down. If it shuts down, it then restarts by itself.
No damage or hazards for the device occur.
Electrostatic discharge EN 61000-4-2
Contact discharge 8 kV Criterion A
Air discharge 15 kV Criterion A
Electromagnetic RF field EN 61000-4-3 80 MHz…2.7 GHz 20V/m Criterion A
Fast transients (Burst) EN 61000-4-4
Input lines 4 kV Criterion A
Output lines 2 kV Criterion A
Surge voltage on input EN 61000-4-5
+

- 1 kV Criterion A
+

- chassis ground 2 kV Criterion A
Surge voltage on output EN 61000-4-5
+

- 500V Criterion A
+

- chassis ground 1 kV Criterion A
Conducted disturbance EN 61000-4-6 0.15…80 MHz 20V Criterion A
Attributes Standards Notes
Conducted emission on input
lines
IEC/CISPR 16-1-2, IEC/CISPR 16-2-1 Limits for local DC power networks fulfilled.
Conducted emission on
output lines
IEC/CISPR 16-1-2, IEC/CISPR 16-2-1
(1)
(1) Not available at the time of publishing.
Radiated emission EN 55011, EN 55022, CISPR 11, CISPR 22 Class B
This device complies with FCC Part 15 rules.
Operation is subjected to following two conditions:
1) this device cannot cause harmful interference, and
2) this device must accept any interference received, including interference that can cause undesired operation.
Attribute Values Notes
Main converter 75…500 kHz Dependent on input voltage and output load