manualshive.com logo in svg

Rockwell Automation 700-1384-01, Руководство пользователя, Страница: 323 / 344

Поделиться
Скачать
Rockwell Automation 700-1384-01 Скачать руководство пользователя страница 323

Appendix

File Maintenance

QuickStick HT User Manual

323

Rockwell Automation Publication MMI-UM007F-EN-P - September 2020

File Maintenance

Backup Files

Making regular backups of all files that have been changed is recommended. Keep copies of 
all original and backup files at a remote location for safety.

Creating Backup Files

Backup files are not created automatically. It is the responsibility of the user to create backups 
of all files by copying them to a safe location.

Restoring from Backup Files

Damaged files can be restored by copying the backup files into the appropriate locations.

Содержание 700-1384-01

























































































































































































































































































































































Отзывы:

Нет отзывов