Rockustics Periscape 6 Скачать руководство пользователя страница 1

INSTALL INSTRUCTIONS

Escape Series

Periscape

 4 • Periscape

 6 • Subscape

 8 • Subscape

 10 • Subscape

 12

Ultra-Fidelity Outdoor Speakers

Contact:  MSE Audio, 855.663.5600 / 913.663.5600 / [email protected]

© 2017 MSE Audio. INS-EscapeSeries. Rev. 07.12.17

Thank you for purchasing Rockustics Escape Series landscape 
speakers. When properly installed, these speakers will provide years 
of listening enjoyment. Flexible mounting options mean these 
speakers can accommodate almost any outdoor space to provide full 
coverage and amazing audio in your private outdoor escape.

If you have any questions that are not answered in the following 
directions, please contact your local sound contractor or email 
[email protected].

Site Preparation

There are several factors to consider when choosing mounting 
locations for your Periscape landscape speakers from Rockustics:
• The speakers may be mounted in the ground with the provided 
ground spike or they may be mounted on walls or vertical surfaces 
with the optional wall mounting plate.
• There should be a direct line of sight from the speaker to the 
listening area.
• Position each speaker so they are all the same distance away from 

the listening area.
• Using high and low speaker locations will help to centralize the 
acoustic stage.
• Position the speakers 15’ - 20’ apart, but not more than 30’ from 
the listening area.
• Be sure to select mounting locations that will not have high foot 
traffic or where landscaping equipment will frequently pass by.
• Do not place the speakers in areas that are prone to flooding with 
standing water.
• The speakers should not be positioned directly in front of, or in 
direct spray from, sprinklers.
• Do not aim the speaker at more than 45˚ from horizontal.
• A spike mount extension is available for installations requiring 
additional mounting depth.

We cannot anticipate or accommodate every possible installation 
configuration. Trial and error methods may have to be employed to 
ahieve acceptable audio dispersion.

Содержание Periscape 6

Страница 1: ...n the ground with the provided ground spike or they may be mounted on walls or vertical surfaces with the optional wall mounting plate There should be a direct line of sight from the speaker to the listening area Position each speaker so they are all the same distance away from the listening area Using high and low speaker locations will help to centralize the acoustic stage Position the speakers ...

Страница 2: ...me typical installation layouts for reference The Periscape and Subscape speakers all come equipped with high voltage 70V transformers and may also be run in an 8 ohm direct mode The included tap switch provides different tap settings and a transformer bypass option which allows for maximum flexibility in installing and tuning the system See the figures below for typical 70 Volt and 8 Ohm wiring c...

Страница 3: ...setting corresponds to the markings on the speaker 11 Once the tap setting has been finalized and the system performance has been approved remove the mylar film from under the tap switch knob by pulling on the exposed tab Push the tap switch on to the speaker to lock the tap switch into position 7 Position the Periscape speaker in the hole ensuring that it is aimed in the intended direction The sp...

Страница 4: ...electrician s tape or a suitable alternative to protect the bare wires from corroding 7 Fully wire the rest of your system and test to make sure the system is performing correctly 9 Back fill the subwoofer hole 3 to 5 Gray Green White 8 Ohm Red 8 Ohm 8 Ohm Wiring Heat Shrink Cap 5 If daisy chaining be sure to also connect the wires going to the next speaker in the chain Be sure to follow standard ...

Отзывы: