background image

2

Need help? Call 800-620-2790

RF-TVMFM03V2 TV Wall Mount

Safety information and specifications

IMPORTANT SAFETY

 

INSTRUCTIONS - 

SAVE THESE INSTRUCTIONS
CAUTION:

 Do not use this product for 

any purpose not explicitly specified by 
Rocketfish.
Improper installation may cause 
property damage or personal injury. If 

you do not understand these directions, or have doubts 
about the safety of the installation, contact Customer 
Service or call a qualified contractor. Rocketfish is not 
responsible for damage or injury caused by incorrect 
installation or use.
The weight of your TV must not exceed 130 lbs. (58.9 kg). 
The wall must be capable of supporting five times the 
weight of your TV and wall mount combined. 
This product contains small items that could be a choking 
hazard if swallowed. Keep these items away from young children!

Maximum TV weight:

 130 lbs. (58.9 kg)

Screen size:

 40" to 60" diagonal

Overall dimensions (H × W × D):

19.5 × 29.5 × 3 in. (50 × 75 × 7.6 cm)

Wall-mount weight:

 17 lbs. (7.7 kg)

We’re here for you

www.rocketfishproducts.com
For customer service, call:
800-620-2790 (U.S./Canada markets)

19

.5

" (5

cm)

29.5" (75 cm)

RF-TVMFM03V2_13-0190_MAN_V2_ENG - GIF.fm  Page 2  Thursday, March 14, 2013  11:27 AM

Содержание RF-TVMFM03V2




















Отзывы: