Safety
•
Warning
: Some medical studies have suggested that long periods of repetitive motion
may be linked to certain types of physical discomfort or injuries. You should take frequent
breaks during game play. If you feel aching, numbness, or tingling in your arms, wrists, or
hands, consult a qualifi ed health professional.
•
Warning
: The starter kit contains small pieces that may pose a choking hazard to small
children. Keep the kit components away from small children.
•
Warning
: To prevent fi re or shock hazard, do not expose the starter kit to rain or moisture.
•
Warning
: Never insert objects into the starter kit components, because they may touch
dangerous voltage points or short out parts, which can result in fi re or electrical shock.
•
Caution
: Do not disassemble or damage any of the starter kit components. Refer all
servicing to qualifi ed personnel.
•
Caution
: Keep the starter kit out of direct sunlight for extended periods of time.
•
Caution
: Use the starter kit only as instructed. Read all instructions before operating.
•
Caution
: The wall adapter (AC) must not be used to power the charger if the plug or cord
is damaged. The plug must be easily unplugged from the wall outlet.
Package contents
•
Dual charge station (for PS3 controllers only)
•
Dual charge station AC power adapter
• Bluetooth
headset
•
Headset ear clip
•
Headset USB charge cable
•
Console stand (for PS3 2nd generation “slim” console model only)
•
Quick Setup Guide
•
Not included
: PS3 controllers
RF-GPS31102
Using the dual charge station
Charging your controllers:
1
Plug the AC power adapter into any available AC power outlet.
2
Connect the AC power adapter’s USB connector to the dual charge station.
3
Attach the Sony PS3 controllers to the charge station. The blue charging
indicator on the charge dock lights up when the controller is connected.
QUICK SETUP GUIDE
PS3 Starter Kit
Indicator status:
•
The LED indicators on the front of the controllers fl ash while charging and
turn off when fully charged.
•
The blue LED indicator on the charge doc remains on while a controller is
attached to the charge station, regardless of the controller’s recharging status.
Using the Bluetooth headset
1
Multifunction button
4
Volume up and down
2
Indicator
5
Clip
3
Microphone
6
Charging connector
The Bluetooth headset must be fully charged before using it for the fi rst time.
To charge the headset:
1
Connect the charge cable to the charging connector on the headset.
2
Connect the charge cable to the PS3 or any standard USB port. The indicator
on the headset turns red while charging and turns blue when fully charged.
3
Disconnect the charge cable from the headset when the headset is fully
charged.
Charging indicator
Charging indicator
