4
Minimum system requirements
•
Pentium 133MHz or better processor
•
CD drive
•
2 MB of hard drive space
•
One available external USB port
•
Windows 2000, Windows XP, Windows Vista, Windows 7, or Mac 10.x or higher
Connecting the card reader
Extend the swivel USB plug and insert it into an available USB port on your
computer. The swivel plug may be rotated so that the card reader will not block
other USB ports on your computer.
Alternately, you can insert the swivel plug into the female end of the supplied USB
extension cable, and insert the male end of the extension cable into an available
USB port on your computer.
If your computer has a Windows 2000, Windows XP, Windows Vista, Windows 7, or
Macintosh OS 10.x or higher operating system, it will automatically install the
correct driver and two new drive icons appear in the My Computer and Windows
Explorer windows (Windows 2000, Windows XP, Windows Vista, Windows 7). If you
want to customize the card reader drive icons, please see “Customizing drive icons
(Windows 2000, XP, Vista, or 7 only)“ on page 6.
Using the card reader
To access a media card using Windows 2000, XP, Vista, or 7:
1
Insert a card into the appropriate slot, as shown in the table below.
Caution:
Cards must be inserted into the correct slot and in the correct direction.
Failure to do so may result in damage to your card and/or card reader.
2
Open the My Computer or Windows Explorer applications, then
double-click the drive icon for the slot you are using.
RF-CRSWIVEL 09-0778_MAN_ENG_V2.fm Page 4 Thursday, September 17, 2009 3:56 PM
