background image

PACKAGE CONTENTS

• Digital outdoor antenna 

• Power inserter

• Coaxial cable 

• AC Adapter

•  Installations kits for wall and pole mounting
•  

Quick Setup Guide

WARNING: INSTALLATION OF THIS PRODUCT NEAR POWER LINES 
IS DANGEROUS. FOR YOUR SAFETY, FOLLOW THE INSTALLATION 
DIRECTIONS.

MOUNTING TOOLS

If mounting to a wall, roof, or another surface, you'll need a:

•  Drill with 5/16" drill bit 

 • 

 

Hammer

•  Phillips screwdriver 

•  Pen or pencil

FEATURES

•  60-mile range for superior reception, even in difficult locations 
•  Amplifier included to boost weak signals from far away
•  Designed for outdoor use—resistant to summer and winter elements
•  Full kit of installation parts included for mounting to exterior walls, roofs, attics, poles, or 

other surfaces 

•  Works with 4K TVs

MOUNTING YOUR ANTENNA

Stationary Installation
1

  Use the base plate to mark the drilling positions.

2

  Use an electric drill with a 5/16" drill bit to drill four holes that are 1.8 in. deep, then clean the 

holes.

3

  Use a hammer to insert the wall anchors (6) into the holes, then attach the pedestal to the 

wall with the large screws (6).

 Place th

e stand tube into the pedestal, then adjust its position and attach with the 

screws (2) and hex nuts (2).

Use a hammer to insert the wall anchors (4) into the holes, then attach the base plate to the 
wall with the large screws (4).

4

  Place the antenna on the base plate, then fasten with the plastic cap screws (4).

QUICK SETUP GUIDE

RF-ANT50UD, 

Long-range Outdoor Antenna

Before using your new product, please read these instructions to prevent any damage.

Final flat size: 23.25 × 5.32  in. (590.55 × 135 mm)
Final folded size: 3.92 × 5.32  in. (98.4 × 135 mm)

Flexible Installation
1

  Use the pedestal to mark the drilling positions.

Use an electric 

drill with a 5/16" drill bit to drill six holes that are 1.8 in. deep, then clean the 

holes.

 

5

  Attach the base plate to the stand tube with U bolts (2), washers (4), and wing nuts (4).

6

  Place the antenna on the base plate, then fasten with the plastic cap screws (4).

Stand tube

Pedestal

Wall

Wall

Wall

Wall

Pedestal

Wall

Pedestal

Wall

Wall

Base plate

Wall

Base plate

Antenna

Plastic cap 

screws

Base plate

Wing nuts

Stand tube

U bolts

Antenna

Plastic cap 

screws

Wall

Base plate

RF-ANT50UD_17-0585_QSG_V1_EN.ai   1   11/3/2017   3:50:35 PM

RF-ANT50UD_17-0585_QSG_V1_EN.ai   1   11/3/2017   3:50:35 PM

Отзывы: