Roche OMNI C, Инструкция по эксплуатации

Страница: 9 / 152

1 Introduction
Instructions for Use, Roche OMNI C, Rev. 4.0, December 2002
1-1
1 Introduction
Fig. 1
The Roche OMNI C is a modular analyzer for measuring blood gases, electrolytes, total
hemoglobin, oxygen saturation and hematocrit in whole blood, serum, plasma, acetate and
bicarbonate containing dialysis solutions, and QC materials.
It is possible to complete database procedures or to make simultaneous adjustments during
measurement or calibration.
The individual, mutually independent operating modes are defined as follows:
a) Analyzer: measuring, QC, system, calibration, commonly used functions
b) Database: data about patients, measurement, calibration, QC, and the instrument
c) Setup: instrument settings
d) Info: Roche info, version number, fill levels, help, sensor report
The Roche OMNI C is currently available in the following configuration:
• BG (pH,
P
O
2
,
P
CO
2
) / ISE (Na
+
, K
+
, Cl
–
, Ca
2+
) and tHb/
S
O
2
A new and patented fluid calibration system eliminates the need for expensive calibration
gases. This change results in easier handling, a smaller footprint, and reduced costs.
An easily understood "Touch Screen" interface facilitates easy operation and saves costly
and time-consuming user training.
The patented electrodes are completely maintenance-free, and only require a very small
sample volume.