Roche OMNI C, Инструкция по эксплуатации

Страница: 24 / 152

1 Introduction
1-16
Instructions for Use, Roche OMNI C, Rev. 4.0, December 2002
1.8 Installation
1.8.1 Installation
Location
For best results, choose a suitable, level location that is not subject to direct sunlight for the
device.
When installing an instrument that was stored in a cool room or was transported at low tem-
peratures, be aware that condensation may have formed and could cause disturbances to the
instrument. Be sure that the instrument is climatized for at least one hour at room temper-
ature before beginning operation.
The following conditions must be fulfilled:
• Ambient temperature: + 15 °C to + 33 °C
• Avoid direct sunlight, vibration and strong electromagnetic fields (electric motors,
transformers, X-ray equipment, cellular phones...).
• Use a stable and level work surface (max. 1° incline with bottles installed).
• Relative humidity: 20 to 95 % (at
≥
+15 °C, to
≤
31 °C)
20 to 90 % (at > +31 °C, to
≤
+33 °C)
• Allow sufficient free space around the instrument for air circulation and the electrical
connections.
•
Check for the correct voltage: 100 to 240 VAC (±10%)
After setting up the Roche OMNI C analyzer at a location that meets the necessary condi-
tions, execute the following steps to ensure the instrument is ready for operation:
• First check the instrument and the accessories for completeness and damage. The com-
pleteness of the delivery can be checked through comparison with the delivery packing
slip.
If anything is missing, please inform your Roche representative immediately.
If the delivery has suffered damage despite careful packing, inform the transportation com-
pany immediately. Please retain the packaging material and products as evidence for the
damage claim.
Accessories
The following parts are delivered as standard equipment with the Roche OMNI C:
1 barcode scanner 1 shutdown kit
2 power cord 1 micro electrode dummy
2 pump tubes 2 fill port holders
1 sample drip tray 2 needles
1 paper roll 2 MCon