Roche OMNI C, Инструкция по эксплуатации

Страница: 144 / 152

8 Operating modes
8-10
Instructions for Use, Roche OMNI C, Rev. 4.0, December 2002
8.3.3 Calibration data
Fig. 15
When you start this function, the Roche OMNI C displays an overview of the saved calibra-
tion data.
Every line displays a short record of a calibration and contains the date, time, type of cali-
bration, as well as the parameter's condition after the calibration.
Press these buttons to scroll through all parameters.
Select the marked entry - the results screen of this calibration is then displayed.
8.3.4 QC data
Fig. 16
When you start this function, the Roche OMNI C displays an overview of the saved QC data.
This screen shows you, based on selected query criteria, all QC materials that were meas-
ured up to this point, the level, lot numbers, and the date on which the QC files were begun.
After you have selected and completed an entry, press the "Zoom" button to receive all
available information on the completed QC file. Every line shows the date, time, operator
ID (when available), and the corresponding status of the available parameters.