Roche CoaguChek XS Pro, Руководство оператора

Страница: 71 / 156

Meter Setup •
4
71
STAT Test Configuration Quality control tests ensure consistent quality and accu-
rate measurements. In emergency situations, however, it
may be necessary to perform a test without delay. To
override an active lockout
1
, you can allow for STAT Tests
(STAT = S hort T urn A round T ime).
You can set the number of tests (up to a maximum of
nine) permitted beyond the lockout. Once the number of
STAT Tests allowed has been reached, additional tests
cannot be performed until you have successfully com-
pleted a quality control test. The default setting is
three
STAT tests.
1. QC, operator, or new lot lockout
The results of STAT tests are always identified by the
label STAT Test when they are displayed (see page 94).