Roche CoaguChek Pro II, Руководство оператора

Страница: 78 / 206

78
CoaguChek
®
Pro II · Operator’s Manual
System Administrator (Admin.)
In the default setting, the meter is not protected with
an
Admin .ID, and all setup options are accessible to
every user. If you set up an Admin .ID, the following
setup areas are automatically reserved only for the
system administrator/ supervisor (i.e., the person who
knows the password).
¾
Screen : Parameter Configuration , Result
Confirmation , Date/Time
¾
Options : Connection (to a computer or a printer)
¾
ID Setup (the entire area)
¾ QC Settings (the entire area)
¾
Diagnostics : Software , Hardware , Memory , Wireless
Setup
When you enter an Admin .ID, this ID will have to be
entered from this point forward before any of the
settings above can be changed. The
Admin .ID must
also be entered before you can delete or change the
Admin .ID itself. If you forget the Admin .ID, contact
your Roche Diagnostics representative.
r
To configure an Admin. ID
1 From the Main Menu , touch Setup to open the
meter settings.
2 From the Setup Menu , touch ID Setup .
3 From the ID Setup menu, touch Admin.
3 Meter Setup
• 3