Roche CoaguChek Pro II, Руководство оператора

Страница: 33 / 206

33
CoaguChek
®
Pro II · Operator’s Manual
Button/Icon Meaning
Quality control: Result is below the specified range
Battery status:
¾
Battery full: When the battery pack is fully charged, all segments
are lit.
¾
Battery good: One missing segment indicates a partially charged
battery pack.
¾
Battery half: Two missing segments indicate a partially charged
battery pack.
¾
Battery low: When there is only one segment remaining the icon
is displayed in red.
¾
Battery empty: When there is no segment remaining, you may not
be able to finish performing a test. Recharge as soon as possible.
When the power supply icon is displayed, the meter is connected to
the power supply adapter or the HBU. Charging is possible when the
meter enters standby mode.
am
Time between midnight and noon (in 12‑hour time format)
pm
Time between noon and midnight (in 12‑hour time format)
Room or meter temperature is outside the acceptable range
The test strip guide cover is open
Reports a status message (see Chapter 9, Troubleshooting )
Reports an error message or a warning (see Chapter 9,
Troubleshooting )
QC!
Lockout, one or more parameters are locked
Reset; resets setup
1 Introduction
• 1