Roche CoaguChek Pro II, Руководство оператора

Страница: 25 / 206

25
CoaguChek
®
Pro II · Operator’s Manual
¾ x12useridF contains a substring of the user ID
longer than four characters.
Wireless connectivity If the meter is equipped with WLAN functionality:
Wireless connectivity allows the meter to send data
(test results, patient IDs, operator IDs, etc.) to the data
management system without the need to return the
meter to the Handheld Base Unit. This feature must be
configured by the system administrator. Observe the
guidelines of your facility for using wireless local area
network connections. For a description of the
CoaguChek Pro II meter’s ability to connect to
Wireless Local Area Networks (WLAN, Wi‑Fi), see
appendix C.1.
u
C.1 Option: Wireless network (WLAN) (195)
Radiofrequency radiation
exposure information
Glossary:
¾
“FCC” stands for “Federal Communications
Commission” (USA).
¾
“RF” stands for “radio frequency”
¾
“RSS” stands for “Radio Standards
Specification” (Canada).
¾
“WLAN” stands for “Wireless Local Area
Network”
The Industrial, Scientific and Medical (ISM) radio
frequencies may contain emissions from microwave
ovens, heaters, and other noncommunication devices.
While these types of devices usually pose no threat of
interference as they are low‑powered devices, the
possibility exists that some industrial high power
systems may wipe out any attempted communication
use of a WLAN. Therefore, perform a site survey and
interference analysis with a spectrum analyzer to view
the entire spectrum, looking for signals that might not
only be within the frequency range of the intended
WLAN but also could be near or at the same
frequency and cause interference.
1 Introduction
• 1