Roche CoaguChek Pro II, Руководство оператора

Страница: 130 / 206

130
CoaguChek
®
Pro II · Operator’s Manual
15 If you are using a new control solution, remove the
strip code chip from the meter and insert the code
chip that came with the control solution instead.
If the code chips get mixed up, check the letter on
the code chips to tell them apart. A capital
S in front
of the number indicates that this code chip is for test
strips. A capital
C in front of the number indicates
that it is a control solution code chip.
16 If performing more than one level, select the level
for this measurement.
The hourglass icon shows that the test strip is
warming up. When the warming‑up process is
complete, a further beep (provided the beeper is
enabled) indicates that you can now apply the
control solution.
The dropper icon flashes to indicate that the meter
is ready to perform the test and is waiting for the
sample to be applied.
At the same time a countdown begins. You must
apply the sample within the displayed time,
otherwise you will receive an error message.
5 Control and Proficiency Testing
• 5