Roche CoaguChek Pro II, Руководство оператора

Страница: 123 / 206

123
CoaguChek
®
Pro II · Operator’s Manual
5 Control and Proficiency Testing
5.1 Control testing
The CoaguChek Pro II meter has a number of built‑in
quality control functions:
¾
A check of the electronic components and
functions every time the meter is powered on.
¾
A check of the test strip temperature while a test is
in progress.
¾
A check of the expiration date and lot information
on the test strip carried out by the code chip.
¾
An onboard quality control within every single test
strip.
Roche Diagnostics offers liquid quality controls for the
CoaguChek Pro II system. These controls are designed
to assist you in meeting regulatory compliance
requirements at your facility.
To perform an optional liquid quality control test using
control solutions, you need:
¾
CoaguChek Pro II meter.
¾
The test strip code chip supplied with the test strip
container you are using (a code chip is provided
with every test strip pack).
¾
Test strips that came with the code chip
mentioned above.
¾
Bottles of CoaguChek PT Controls,
CoaguChek aPTT Controls, diluent droppers, and
the quality control code chip provided.
You can choose the frequency of liquid quality control
tests in the meter setup (see Chapter 3,
Meter Setup ,
QC (quality control) Lockout ). If the control results in
the display are in the specified range, this confirms
that the liquid control test was performed correctly.
5 Control and Proficiency Testing
• 5