Roche CoaguChek Pro II, Руководство оператора

Страница: 116 / 206

116
CoaguChek
®
Pro II · Operator’s Manual
If too much blood has been applied (> 20 μL) the
exterior of the meter and the test strip guide
should be cleaned and disinfected.
For additional information on sample collection see
Getting a good result from venous whole blood
(104)
You hear a beep tone when you have applied
enough blood (provided the Beeper is enabled).
The blood drop symbol disappears and the test
starts.
Do not add more blood sample. To avoid error
messages do not touch the test strip until the result
is displayed.
The meter performs an automatic quality control
test on the test strip before it displays the test
result. “QC” appears in the display.
Following a successful outcome of the quality
control test, a checkmark appears after “QC.”
The result is displayed in the unit you chose when
setting up the meter. It is automatically saved.
For information on the valid measuring ranges for
CoaguChek test strips refer to the package insert
of the respective test strip.
4 Testing a Blood Sample
• 4