Roche CoaguChek Pro II, Руководство оператора

Страница: 108 / 206

108
CoaguChek
®
Pro II · Operator’s Manual
4 If the function Operator ID is active, without
operator list , you are now prompted to enter an
Operator ID .
(4)
• Enter the Operator ID using the keypad .
Touch to move to the next screen.
5 Alternatively, the Operator ID can also be entered
using the built‑in barcode scanner .
(5),(6)
Touch
Scan and scan the operator barcode from a
distance of approx. 10‑20 cm (4‑8 inches),
according to the barcode size. The meter beeps
once the barcode has been read successfully. The
barcode information appears in the operator ID
field. The scanner turns off after 10 seconds, if a
barcode is not scanned.
6 If the function Operator ID is active, with operator
list , wait until the operator list is displayed.
7 Select the operator of choice by touching the
corresponding button or touch Scan to scan an
operator barcode.
Note: Scanned operator IDs must also be on the list.
Otherwise the login attempt will fail and an error
message will be displayed.
(4)
For configuring operator and patient IDs, see (151) Configuring operator and patient IDs
(5)
A list of supported barcode symbologies can be found in (186) A.2 Example of barcode symbologies
(6)
A list of supported characters can be found in (189) A.3 Supported characters in 2D barcodes
4 Testing a Blood Sample
• 4