Roche CoaguCheck Pro II, Руководство оператора

Страница: 125 / 188

Control and Proficiency Testing •
5
125
You hear a beep when you have applied enough control
solution (provided the beeper is enabled). The dropper
icon disappears and the test starts.
The result of the liquid quality control test is displayed. It
is automatically saved to memory.
The acceptable range of results for the liquid control is
displayed below the current result, along with Pass or Fail .
If a quality control test fails, an up arrow (too high) or
down arrow (too low) is displayed and flashes.
Note: The arrow (next to the result) refers to the INR
result only.
Regardless of the Result Units settings chosen for PT,
aPTT is always displayed in seconds (see page 50).
If you have selected to display INR and %Quick or INR
and seconds, the (up or down) arrow next to the result
refers only to the INR value.
The printer icon only appears if the printer function
is activated. Otherwise it is not displayed.
QC Test
09:15 am
05/29/2015
0.9 INR Fail
110 %Q
05/29/2015 09:15 am
QC: 999
Code: 184
Op: Operator 1
Par: PT
Level: 1
(1.0 - 1.4 INR)
(53 - 99 %Q)
QC Test 09:15 am
05/29/2015
1.2 INR
78 %Q
05/29/2015 09:15 am
QC: 999
Code: 184
Op: Operator 1
Par: PT
Level: 1
(1.0 - 1.4 INR)
(53 - 99 %Q)
Pass:
QC Test
09:15 am
05/29/2015
QC: 999
Code: 184
Op: Operator 1
Par: PT
Level: 1