Roche Cedex Bio Скачать руководство пользователя страница 410

Страница: 410 / 496

Roche Diagnostics

E-20

Operator’s Manual · Version 3.1

13 ISE operation

Cedex Bio System

Daily operation

Preparing the system

Short guide

The following table provides an overview on the steps that make up the preparation
process.

For non-ISE-specific tasks, see

Preparing the system

on page B-12.

Step

User action

Start the Prepare wizard.

1. On the

Overview

tab, press

Prepare

Check the status of the external
containers.

1. Refill the water container, if required, and con-

firm by pressing the water button. (If you refill
the water, empty the waste as well.)

2. Empty the waste container, if required, and

confirm by pressing the waste button.

3. Replace the cleaner bottle, if required, and con-

firm by pressing the cleaner button.

4. Press

to proceed to the next stage in the

Prepare

wizard.

Check the onboard ISE fluids.

1. Replace the ISE fluid bottles, if required.
2. Replace the electrodes, if required.
3. Press

to proceed to the next stage in the

Prepare

wizard.

Perform the maintenance
actions that are due.

1. Perform the

Daily Prepare Actions

mainte-

nance action.

2. Perform the other ISE maintenance actions

that are due.

Perform at least all red maintenance actions.

Table E-4

Steps for preparing the system

Содержание Cedex Bio

















































































































































































































































































































































































































































































































Результаты поиска

Содержание Cedex Bio

Отзывы:

Похожие инструкции для Cedex Bio

Бренды по названию

Популярные бренды

Roche Cedex Bio, Руководство оператора

Результаты поиска

Содержание Cedex Bio

Отзывы:

Похожие инструкции для Cedex Bio

Бренды по названию

Популярные бренды