Roche Cedex Bio, Руководство оператора

Страница: 365 / 496

Roche Diagnostics
Operator’s Manual · Version 3.1 D-27
Cedex Bio System 10 Result flags
Safety
Safety
Before you start troubleshooting, it is essential that you both read and understand the
safety information listed below.
Read carefully all safety notices given in instructions and make sure you understand
them.
WARNING
Injury through working solutions
Direct contact with cleaning solutions or other working solutions may cause personal
injury. When handling such solutions, exercise the precautions required for handling them,
observe the cautions given in the package insert, and observe the information given in the
Safety Data Sheets available for Roche Diagnostics cleaning solutions.
Infection by biohazardous materials
Contact with samples containing material of human origin may result in infection. All mate-
rials and mechanical components associated with samples of human origin are potentially
biohazardous.
o
Be sure to wear protective equipment. Take extra care when working with protective
gloves; these can easily be pierced or cut, which can lead to infection.
o
If any biohazardous material is spilled, wipe it up immediately and apply disinfectant.
o
If waste solution contacts your skin, wash it off immediately with water and apply a dis-
infectant. Consult a physician.
Personal injury or damage to the analyzer due to contact with instrument
mechanism
Do not touch moving parts during instrument operation.
Incorrect results or damage to the analyzer due to wrong operation
Operators are required to have a profound knowledge of relevant guidelines and norms as
well as the information and procedures contained in the Operator’s Manual.
o
Do not carry out operation and maintenance unless you have been trained by Roche
Diagnostics.
o
Start all maintenance actions on the screen. Do not perform maintenance actions with-
out the assistance of the user interface.
o
Carefully follow the procedures specified in the Operator’s Manual for the operation
and maintenance of the system.
o
Leave maintenance that is not described in the Operator’s Manual to trained service
representatives.
o
Follow standard laboratory practices, especially when working with biohazard material.
Where a flag description gives a list of recommended actions, work through each step in
turn until you have solved the problem. Proceed to the next step only after you have com-
pleted the previous one.