INSTRUCTION MANUAL
ASSEMBLY, INSTALLATION, USE AND MAINTENANCE.
Rev. 09/2015
Rocam Losi s.r.l. decline every responsibility on any print and/or transcription mistake contained in this booklet
Rocam Losi s.r.l. can change features and datas of this booklet with the proposal of keeping on increase the quality of its products.
Anytime and without notice, this booklet can’t be considered as contract with third parties.
2
We thank you for purchasing a Rocam Losi product, designed and produced for a
professional environment.
1. Instruction warnings
The user must hold whole instruction manual and store up this document in case of
use. The producer do not assume any responsibility for damages incurred due to the
failure of improper use of this manual. All measures in this manual are expressed in mm.
2. Safety and Right Use Warning
The Rocam Losi products meet the latest technological evolutions and
current safety guidelines. The trolley of the lines
DRAGONE - CERERE
,
object of this booklet, is projected to be in compliance with directives and
field laws, in order to guarantee a safe and reliable product. Any other use
will be considered inapposite to the original destination. Producer do not
assume any responsibility for damages caused by an improper use.
Responsibility lies only on user. A proper use also includes compliance with the
instructions for use and installation and any additional documentation as well as the
conditions of inspection and maintenance.
3. Warranty
Due to commercial and construction requirements, the manufacturer reserves the right to
make changes in order to enhance the quality and use of product. Rocam Losi s.r.l., in
compliance with European Community legislation, grants its products for 12 months. This
guarantee does not include electrical parts, labour and all replacements related to an
improper use of the good. Any manipulation carried out automatically excludes the liability
of the manufacturer. The products or parts to be replaced or repaired for unequivocal
defects in workmanship and materials used must be in a “free port” at the offices of the
producer, who after a careful inspection, will repair or replace them. The repairs are
carried out exclusively at the headquarters of the manufacturer, and none cost incurred by
the customer for repairs will be refunded by the manufacturer unless expressly agreed.
4. Installation and assembly
This article is packed and delivered unassembled. Its assembly must be
executed by qualified staff. The manufacturer declines every responsibility of
damage of someone or something caused by the failure to comply with the
instructions of this manual.
Do not make any structural change to the trolley.
The elements composing the packaging (plastic, polyurethane foam, bubble wrap,
Styrofoam, cardboard and so on) must be kept away from children as potential sources of
danger and must be collected and disposed off separately in accordance with local
regulations.
