Robustel EG8001 User Guide
RT_UG_EG8001_v.1.0.1 2 June, 2017 78/84
Confidential
! Comments
add Add a list entry of configuration
clear
Clear statistics
config
Configuration operation
debug Output debug information to the console
del
Delete a list entry of configuration
exit
Exit from the CLI
help
Display an overview of the CLI syntax
ping
Send messages to network hosts
reboot
Halt and perform a cold restart
route
Static route modify dynamically, this setting will not be saved
set
Set system configuration
show Show system configuration
status
Show running system information
tftpupdate
Update firmware using tftp
traceroute
Print the route packets trace to network host
urlupdate
Update firmware using http or ftp
ver
Show version of firmware
5.2
How to Configure the CLI
Following is a table about the description of help and the error should be encountered in the configuring program.
Commands /tips
Description
?
Typing a question mark “?” will show you the help information.
Ctrl+c
Press these two keys at the same time, except its “copy” function but also
can be used for “break” out of the setting program.
Syntax error: The command is not
completed
Command is not completed.
Tick space key+ Tab key
It can help you finish you command.
Example:
# config (tick Enter key)
Syntax error: The command is not completed
# config (tick space key+ Tab key)
commit save_and_apply loaddefault
# config save_and_apply /
#config commit
When your setting finished, you should enter those commands to make
your setting take effect on the device.