Robustel C9200 User Guide
RT_UG_C9200_v.1.0.1 for NA 27 Nov. 2019 23/27
6.
Select
Yes
if the following window pops up;
7.
After installing the driver, you can view the new network adapter in device manager.
3.1.2
IP address configuration of PC end
After the PC successfully loads the network adapter driver, the PC configures its IP address through the following
methods: configure a static IP address on the local connection of the PC in the same subnet as the 4G Internet of
things wireless communication terminal, and then access the device interface.
This section takes configuring a Windows 7 system as an example. The configuration of windows system is similar.
1.
Click
Start > Control Panel > network and sharing center,
and click
Ethernet adapter
in the open window;
