RVS00450PIR-01/04, RVS00850PIR-01/04
VISION SINGLE/DOUBLE SPOT
LED WALL LIGHT WHITE/BLACK
WITH PIR SENSOR
Issue 1 020215
Page 1
Suitable for mounting on normally flammable surface
Code:
Voltage:
Power:
Lumen:
CCT:
CRI:
Beam angle:
IK:
IP:
Ta range:
Safety Class:
Detection range:
Mounting Height:
Delay time:
Light Level Adjustment:
Dimension(mm):
Weight:
Installation:
Warranty:
RVS00450PIR
220V-240V~50/60Hz
4W
270lm
5,000K
80
120
o
03
44
-5°C~45°C
Class II
Max.8m range
Max3.0m
Adjustable time delay
10 seconds ~ 5 minutes
Daylight to night adjustable
(W)67 x (H)185 x (D)140
0.3Kg
Wall mounting
3 years
RVS00850PIR
220V-240V~50/60Hz
8W
520lm
5,000K
80
120
o
03
44
-5°C~45°C
Class II
Max.8m range
Max 3.0m
Adjustable time delay 10
seconds ~ 5 minutes
Daylight to night adjustable
(W)150 x(H)170 x (D)150
0.4Kg
Wall mounting
3 years
1. Ensure mains supply is switched off before commencing work
2, Remove the screw from the base, press down the auto-lock and
remove the base
3. Mark appropriate fixing points on wall, ensure that the fixing
points does not impinge on joists, pipe work, cables or other
building services
4. introduce the supply cable through cable entry,
5. Fix base to the wall using screws provided, ensure that it is
secure
6, Connect supply to the terminal block, Brown (live) to L and Blue
(neutral) to N
7. Attach the fitting to base using the auto-lock and screw, ensure
the fitting is secure
This product has no user serviceable parts. If any part is damaged,
disconnect from mains and discontinue use.
Walk testing can then be carried out to determine detection area
with slow walking pace. When the sensor detects movement, the
fitting will be switched on for the pre-set time. For the walk test
turning the Lux control toward the sun position and set time delay to
10s and establish sensor functionality. When finished, set controls
to desired levels.
Note: Once sensor has been triggered, subsequent detection
restarts timing period from beginning, so light stays on until set
time elapses after last triggering
Specifications
Installation
Information for the Product user:
1. Please note the requirement to dispose of Waste Electrical & Electronic Equipment separately from household waste (WEEE marked with
crossed out wheelie bin symbol).
2. Please consider your role in contributing to re-use and recycling by returning this product at end of life to a collection centre for waste electrical
equipment or a Civic Amenity site, or to a retail outlet from which you are purchasing a replacement.
3. This equipment may contain substances that are hazardous to health and the environment if disposed of carelessly. It is important that it is
separated from normal household waste and recycled in the WEEE chain
4. The “crossed out wheelie bin symbol” on a product indicates this equipment must not be disposed of in normal household waste, but should be
disposed of according to local WEEE regulations
The Installation must be carried out by an electrician
ISO 9001:2008
Q UAL IT Y ASSU RED CO MPANY
Instruction manual
LED Group
Western Retail Park
Tel: +353 1 7099000
Nangor Road
Fax: +353 1 7099060
Dublin 12
Email: [email protected]
Ireland
Website: www.led.ie
PLEASE READ INSTRUCTION BEFORE COMMENCING INSTALLATION AND RETAIN FOR FUTURE REFERENCES.
! Electrical products can cause death or injury, or damage to property. If in any doubt about the installation or
use of this product, consult a competent electrician
Note:
Product technical information and specification may change over time without prior notification
For the latest technical information please visit our web site www. ledgrouprobus.com or robusdirect.com
