Warnings
6
III
▶
2016/426/EU "Gas Appliances Regulation" as amended and
added.
▶
2014/30/EC "Electromagnetic Compatibility Directive" as
amended and added.
▶
2014/35/EC "Low Voltage Directive" as amended and added.
▶
2006/42/EC "Machine Directive" as amended and added.
▶
2281/2016/EU "Ecodesign requirements for air heating prod-
ucts" as amended and added.
Furthermore, they comply with the requirements of the follow-
ing standards:
▶
EN 1020 Non-domestic forced convection gas-
fi
red air heat-
ers for space heating not exceeding a net heat input of 300
kW incorporating a fan to assist transportation of combus-
tion air or combustion products.
▶
prEN 17082 Domestic and non-domestic gas-
fi
red forced
convection air heaters for space heating not exceeding a net
heat input of 300 kW.
Other applicable provisions and standards
The design, installation, operation and maintenance of the sys-
tems shall be carried out in compliance with current applicable
regulations, depending on the Country and location, and in ac-
cordance with the manufacturer's instructions. In particular, reg-
ulations regarding the following shall be complied with:
▶
Gas systems and equipment.
▶
Electrical systems and equipment.
▶
Heating systems.
▶
Environmental protection and combustion products ex-
haust.
▶
Fire safety and prevention.
▶
Any other applicable law, standard and regulation.
III.3
EXCLUSIONS OF LIABILITY AND
WARRANTY
Any contractual or extra-contractual liability of the man-
ufacturer for any damage caused by incorrect installa-
tion and/or improper use and/or failure to comply with
regulations and with the manufacturer's directions/in-
structions shall be disclaimed.
In particular, the warranty on the appliance may be ren-
dered void by the following conditions:
Incorrect installation.
Misuse.
Failure to comply with the manufacturer's indications on
installation, use and maintenance.
Alteration or modi
fi
cation of the product or any part
thereof.
Extreme operational conditions or however outside of
the operational ranges set forth by the manufacturer.
Damages caused by external agents such as salts, chlo-
rine, sulphur or other chemical substances present in the
air of the installation site.
Abnormal actions transmitted to the appliance by the
plant or installation (mechanical stresses, pressure, vi-
brations, thermal expansion, electrical surges...).
Accidental damages or due to force majeure.
Содержание Next-R
Страница 51: ......