Robot System Products P6413, Руководство по эксплуатации продукта

Страница: 30 / 44

30 M0620-1 ver 2.8
4.1.2 Recommended tools for maintenance
Tools Applications
Complete set of Allen keys For dismounting and mounting.
Pair of pliers For dismounting the signal pins.
Flat-head screwdriver For removing the air sealings.
Torque wrench For all socket head cap screws
4.1.3 Wear parts
Wear parts should be replaced before considerable damage occurs. The interval depends on the
number of tool changes and the working environment. Generally, the more contaminated
environment the more frequent maintenance intervals.
The following parts are considered as wear parts:
o
Signal pins (TC)
o
Air sealings (TC)
o
O-rings
4.1.4 Activities and intervals
Equipment Maintenance
activity Interval Description
Swivel tool
changer Inspection 2 weeks Visual inspection of swivel tool changer (see
section 4.2.1 ).
Swivel tool
changer Cleaning 1 month Cleaning of swivel tool changer, interval
depending on the environment (see
section
4.3.1 ).
Looking balls Clean and
lubricate 1 month Check, wipe clean and lubricate looking balls
(see
section 4.3.1 ).
Signal pins Cleaning 1 month Wipe the pins clean (see section 4.3.1 ).
Air sealings Replace 18 months Wear parts, interval is depending on number of
tool changes and the environment (see
section
4.5.1 ).
Signal pins Replace 18 months Wear parts, interval is depending on number of
tool changes and the environment (see
section
4.5.2 ).
Swivel tool
changer Service 30 months Complete service, to be done by Robot System
Products (see
section 4.5 ).