Robot System Products P1301, Руководство по эксплуатации продукта

Страница: 50 / 72

50 M0623-1 ver 2.6
4.3 Cleaning
4.3.1 Cleaning and lubrication of tool changer
Action Note
1 Clean locking balls Wipe the locking balls with a
cloth.
2 Check locking balls Check each ball to make sure it
moves freely. Additional
cleaning may be necessary to
free any balls stuck in place.
3 Lubricate looking balls Apply a small amount of grease
(Molykote BR2Plus) on the
locking balls.
NOTE! It is important that this is
done or else there is a risk that
the tool attachment jams.
4 Clean air couplings and air sealings Wipe the couplings and sealings
with a cloth. Apply a small
amount of grease (Magnalube-
G) on the contact surfaces.